Fuse Replacement - DAELIM ROADWIN 125 FI Manual

FUSE REPLACEMENT

Turn off the main switch to see if the fuse is
severed. If the fuse is severed, exchange the
fuse into 15A fuse.
Fuse is installed inside fuse holder located
near battery.
To separate fuse, open fuse holder, hold
both ends of fuse cord and pull up, and
pull out the fuse connector crosswise.
If the fuse immediately becomes severed
after being changed with the new one,
check another problem of the electric
system.
WARNING
Never use a fuse with a different rating
from that specified. Serious damage to
the electrical system or a fire may
result, causing a dangerous loss of
lights or engine power.
46
<DISASSEMBLY> <ASSEMBLY>
CAUTION
Turn the ignition switch OFF before
checking or replacing fuse to prevent
accidental short-circuiting.
When disassemble fuse, make sure that
fuse holder isn't separated.
After assembling fuse in the part of
connector, check if fuse moves easily
to a line. If fuse moves easily, it may
cause an accident at heating.
When replacing any of the electrical
parts (lights and gauges), be sure to
replace them with the recommended
parts. Using different parts can lead to
the fuses burning out or damage to the
battery.
When washing the vehicle take special
card not to allow to be splashed in the
area of the fuse.