CABLE RUBBER PART
A rubber part is assembled on the cable to
protect the inner cable.
Make sure that this part is placed firmly
around the correct part of the cable.
When washing the car, do not directly
spray water on to the rubber part is dirty,
use a dry cloth to clean this area.
CAUTION
Infiltration of the foreign materials or
●
water caused by damage of lever
(disengagement, tearing, etc.) may
cause freezing in winter season
resulting in faulty operation, sudden
accelation and braking force decrease.
If any damage is found, replace with
the new on immediately.
GENERAL CLEANING
To preserve the finish of metal parts and
●
paintwork, wash and clean you rmotorcycle
at regular intervals, anyway according to
the road conditions you ride in.
Especially during winter period through
●
road salt a continuous cleaning of the
vehicle is necessary so that remove the road
salt. Use specific products only.
Avoid aggressive detergents or solents
●
<IMPORTANT>
Do not wash your motorcycle right after
●
use.When the motorcycle is still hot,
water drops will evaporate faster and
spot hot surfaces.
Do not use high pressure water jets.
●
Never aim the nozzle direct at wheel
bearings, front fork seals, electric items,
air inlets or exhaust pipe ends.
Clean off stubborn dirt or exceeding
●
grease from engine parts using a
degreasing agent.
Be sure to avoid contact with drive parts
(chain, sprockets, etc)
Rinse with warm water and dry all surfaces
with chamois leather.
49