Working Mode; Network - TP-Link TL-WR702N User Manual

8.4 Working Mode

The Router supports five operation mode types: AP, Router, Repeater, Bridge and Client.
Please select one your want. Click Save to save your choice, which is shown as Figure 8-3.
AP - The wireless access point mode.
Router - The wireless Router Mode. In this mode, the device enables multi-user to share
Internet via DSL/Cable Modem. The only wired port works as WAN.
Repeater - The wireless Repeater Mode. It could extend the range of wireless network.
Bridge - The wireless Bridge Mode. It could communicate with another wireless network.
Client - The Client Mode. The computer connected by Ethernet could get access to an AP by
Client mode.
Click OK in the following screen and then the Router will reboot and to work on Client Mode.

8.5 Network

Figure 8-5 the Network menu
There is only one submenu under the Network menu (shown in Figure 8-5): LAN.
TL-WR702N
Figure 8-3 Working Mode
Figure 8-4
- 144 -
150Mbps Wireless N Nano Router