Factory Defaults - TP-Link TL-WR702N User Manual

Hardware Version - This displays the current hardware version. The hardware version of the
upgrade file must accord with the Router's current hardware version.
To upgrade the Router's firmware, follow these instructions below:
1. Download a more
(http://www.tp-link.com).
2. Type the path and file name of the update file into the File field, or click the Browse button to
locate the update file.
3. Click the Upgrade button.
Note:
1. New firmware versions are posted at http://www.tp-link.com and can be downloaded for free.
There is no need to upgrade the firmware unless the new firmware has a new feature you
want to use. However, when experiencing problems caused by the Router rather than the
configuration, you can try to upgrade the firmware.
2. When you upgrade the Router's firmware, you may lose its current configurations, so before
upgrading the firmware please write down some of your customized settings to avoid losing
important settings.
3. Do not turn off the Router or press the Reset button while the firmware is being upgraded,
otherwise, the Router may be damaged.
4. The Router will reboot after the upgrading has been finished.

4.8.3 Factory Defaults

Choose menu "System Tools → Factory Defaults", and you can restore the configurations of
the Router to factory defaults on the following screen.
Click the Restore button to reset all configuration settings to their default values.
• The default User Name: admin
• The default Password: admin
• The default IP Address: 192.168.0.254
• The default Subnet Mask: 255.255.255.0
TL-WR702N
recent firmware upgrade
Figure 4-23 Restore Factory Default
- 47 -
150Mbps Wireless N Nano Router
file from the TP-LINK website