TP-Link TL-WR702N User Manual page 136

150mbps wireless n nano router
Hide thumbs Also See for TL-WR702N:
Table of Contents

Advertisement

• WEP Key (Password) - Select which of the four keys will be used and enter the matching
WEP key that you create. Make sure these values are identical on all wireless stations in
your network.
• Key Type - You can select the WEP key length (64-bit, or 128-bit, or 152-bit.) for
encryption. "Disabled" means this WEP key entry is invalid.
64-bit - You can enter 10 hexadecimal digits (any combination of 0-9, a-f, A-F, zero key is
not promoted) or 5 ASCII characters.
128-bit - You can enter 26 hexadecimal digits (any combination of 0-9, a-f, A-F, zero key is
not promoted) or 13 ASCII characters.
152-bit - You can enter 32 hexadecimal digits (any combination of 0-9, a-f, A-F, zero key is
not promoted) or 16 ASCII characters.
Note:
If you do not set the key, the wireless security function is still disabled even if you have selected
Shared Key as Authentication Type.
WPA /WPA2
• Version - you can choose the version of the WPA security from the pull-down list. The
default setting is Automatic, which can select WPA (Wi-Fi Protected Access) or WPA2
(WPA version 2) automatically based on the wireless station's capability and request.
• Encryption - You can select Automatic, TKIP or AES.
• Radius Server IP - Enter the IP address of the Radius server.
• Radius Port - Enter the port that Radius server used.
• Radius Password - Enter the password for the Radius server.
• Group Key Update Period - Specify the group key update interval in seconds. The value
should be 30 or above. Enter 0 to disable the update.
WPA-PSK/WPA2-PSK- It's the WPA/WPA2 authentication type based on pre-shared
passphrase.
• Version - you can choose the version of the WPA-PSK security on the drop-down list. The
default setting is Automatic (Recommended), which can select WPA-PSK (Pre-shared
key of WPA) or WPA2-PSK (Pre-shared key of WPA) automatically based on the wireless
station's capability and request.
• Encryption - When WPA-PSK or WPA is set as the Authentication Type, you can select
Automatic (Recommended), TKIP or AES as Encryption.
• PSK Password - You can enter ASCII or Hexadecimal characters. The default password
is the last unique eight numbers of each Router's MAC address
TL-WR702N
150Mbps Wireless N Nano Router
- 130 -

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents