TP-Link TL-WR702N User Manual page 162

• Change the Wireless configurations.
• Change the Web Management Port.
• Upgrade the firmware of the Router (system will reboot automatically).
• Restore the Router's settings to factory defaults (system will reboot automatically).
• Update the configuration with the file (system will reboot automatically.
8.8.6 Password
Choose menu "System Tools → Password", and then you can change the factory default user
name and password of the Router in the next screen as shown in Figure 8-21.
It is strongly recommended that you should change the factory default user name and password
of the Router, because all users who try to access the Router's Web-based utility or Quick Setup
will be prompted for the Router's default user name and password.
Note:
The new user name and password must not exceed 14 characters in length and not include any
spaces. Enter the new Password twice to confirm.
Click the Save button when finished.
Click the Clear All button to clear all.
TL-WR702N
Figure 8-21 Password
- 156 -
150Mbps Wireless N Nano Router