Accessories; Waste Seperation; Warranty - Maxi-Cosi RODI XR Instructions For Use Manual

EXI0212_GBA_Rodi_I_BW:--
• Check to make sure the Maxi-Cosi Rodi XR is securely adjusted into one of the two positions (sitting or
reclining).
• Check to make sure the Maxi-Cosi Rodi XR is fastened in the seat belt when not in use. Any loose objects in
the car can constitute a danger for passengers.
Important!
• Make sure the seat belt is not twisted.
GB
• The seat belt must rest flat and tightly across the body.
• Make sure the shoulder belt is not resting against the child's neck, but across his shoulder (12).
12
• The lap belt must not push against the child's stomach but run across the upper legs.
• If it is not possible to fasten the seat belt properly or tightly enough, contact your supplier immediately. Do
not use the Maxi-Cosi Rodi XR under any circumstances.

6. ACCESSORIES

The following accessories are available for the optimum use of the Maxi-Cosi Rodi XR:
Summer cover
Cup holder
7. WASTE SEPARATION
To ensure optimum and safe use of car safety seats, they should not be used for longer than 5 to 6 years
after the date of purchase. Ageing of the plastic, for instance under the influence of sunlight (UV), may quite
unnoticeably reduce the qualities of the product.
Once the child has grown out of the seat, we therefore advise you to no longer use the car seat and to
dispose of it in the proper way.
As we care for the environment we request the user to separate the waste produced at the start (packaging)
and end (product parts) of the life of the Maxi-Cosi Rodi XR.
Make sure to keep plastic wrapping material out of reach of your child in order to avoid the risk of
suffocation.
Packaging
Product parts
12
09-12-2008 11:36
Cardboard box
Plastic bag
Fabric cover
Plastic parts
Metal parts
Tether
Belt buckle

Warranty

Pagina 12
Paper waste
Residual waste
Residual waste
In accordance with the typification of the
appropriate container
Container for metal
Container for polyester
Residual waste