Accessories - Maxi-Cosi Mico Max 30 Instructions Manual

Hide thumbs Also See for Mico Max 30:
Table of Contents

Advertisement

29
To Remove Canopy
Using a screwdriver, press in
on canopy tab locks on canopy
hub and pull the canopy hoop
off the hubs.
Pull canopy hoop out of
canopy.
To Install Canopy
The canopy hoop has an angle
that will make the canopy lean
forward when installed. Make
sure the angle is correct when
you thread the canopy hoop
into canopy.
Thread Canopy Hoop
Completely Through
Channel on the Front
Edge of Canopy
Attach Canopy
Fit back of canopy over back
of shell.
Snap each plastic strip end to
each canopy hub.

Accessories

Infant Head Support
When using the head
support, make sure it does
not cover your
in any way.
Remove the head support
for older infants.
To remove head support,
pull it off the harness strap
as shown.
Harness Covers
Harness covers help provide
comfort to the neck.
If harness covers will not allow
proper positioning of the chest
clip or interfere with getting a
tight enough fit for a smaller
infant, remove and do not
use. Store until infant is large
enough to use these harness
covers while maitaining a
properly fitting harness.
To remove harness covers,
pull the fastening strips apart and remove harness
covers from the harness strap.
infant's
face
30

Advertisement

Table of Contents
loading

Table of Contents