Identifying Product Components - HP C7745NB - SureStore DLT Tape Autoloader 1/9 Service Manual

Identifying Product Components

Table 1
Component
1 SCSI interface cable
2 SCSI terminator
3 SCSI jumper cable
4 Power cord
5 Cleaning cartridge
6 Tape cartridge
7 User manual
8 Quick setup poster
9 Label kit
12 Identifying Product Components
Standard Accessory Kit Included with the Autoloader
Two-meter SCSI cable with 68-pin connectors.
68-pin SCSI terminator (HVDS or LVDS) to terminate the SCSI chain.
68-pin cable that connects the controller to the drive.
Localized power cord.
One cleaning cartridge to clean the drive.
One tape cartridge included for data backup.
Describes installation, operation, configuration, and troubleshooting
information. You can find localized versions of the manual at
http://www.hp.com/support.
Describes installation and configuration procedures.
Includes two kits: one for the barcode labels and one for the pull-out
information tabs.
Description
Chapter 1