HP C7745NB - SureStore DLT Tape Autoloader 1/9 Service Manual page 26

Figure 7
26 Installing the Autoloader into a Rack
9. Install the trim brackets and filler panel by following these steps:
Insert the right trim bracket on the right side of the autoloader by aligning
the slotted holes on the trim bracket with the guide pins on the autoloader
(the right and left trim brackets are different, (see
— If you are only installing one autoloader, install the filler panel on the
left side of the autoloader by aligning the slotted holes on the filler
panel with the guide pins on the autoloader (see
— If you are installing two autoloaders, install the left trim bracket on the
left side of the second autoloader (see
Installing the Trim Bracket and Filler Panel
Installing One Autoloader
Figure 7
Figure
Figure 7).
Installing Two Autoloaders
on page 26).
7).
Chapter 1