Cr_Fancontrol Command; Cr_Lamplifere Command; Cr_Rcode Command - Sanyo PDG-DWL100 - WXGA DLP Projector Command Manual

PDG-DWL100 Expand Serial Command Functional Specifications

9.11.10 CR_FANCONTROL Command

Command "CR_FANCONTROL" [CR]
Details Get setting status of Fan control.
Acceptable
Correspondence
Unacceptable

9.11.11 CR_LAMPLIFERE Command

Command "CR_LAMPLIFERE" [CR]
Details Get setting status of Lamp life Reminder.
Acceptable
Correspondence
Unacceptable

9.11.12 CR_RCODE Command

Command "CR_RCODE" [CR]
Details Get selected Remote Control Code
Acceptable
Correspondence
Unacceptable
"000_%1" [CR]
"ON" -------------------- On is selected.
%1
"OFF" ------------------- Off is selected.
"?" [CR]
"000_%1" [CR]
"ON" -------------------- On is selected.
%1
"OFF" ------------------- Off is selected.
"?" [CR]
"000_%1" [CR]
"001" --------------------------- Code1 is selected
%1
"002" --------------------------- Code2 is selected
"?" [CR]
44 / 47