Cr_Pjlockmenu Command; Cr_Fanmode Command; Cr_Fancontrol Command; Cr_Filh Command - Sanyo PLC-WU3800 Manual

PLC-WU3800 Expand Serial Command Functional Specifications
Unacceptable

9.11.26 CR_PJLOCKMENU Command

Command "CR_PJLOCKMENU" [CR]
Details Get status of PJ Lock on Menu
Acceptable
Response
Unacceptable

9.11.27 CR_FANMODE Command

Command "CR_FANMODE"[CR]
Details Get selected Fan mode
Acceptable
Response
Unacceptable

9.11.28 CR_FANCONTROL Command

Command "CR_FANCONTROL"[CR]
Details Get selected Fan control setting status
Acceptable
Response
Unacceptable

9.11.29 CR_FILH Command

Command "CR_FILH"[CR]
Details Get Filter used time
Acceptable
Response
Unacceptable

9.11.30 CR_FILREPL Command

Command "CR_FILREPL"[CR]
Details Get the information of Filter replacement time
Response Acceptable
"LOCK" ------------- PJ Lock is in operation. PJ Lock status is ON-1
%1 "FREE" ------------- PJ Lock is released. PJ Lock status is OFF, or,
"Error Code" [CR]
"000_%1[CR]
"ON1" ------------- PJ Lock status is On-1
%1 "ON2" ------------- PJ Lock status is On-2
"OFF" ------------- PJ Lock status is OFF
"Error Code" [CR]
"000_%a"[CR]
"L1" ----------------------- Fan mode is L1
%a
"L2" ----------------------- Fan mode is L2
"Error code"[CR]
"000_%a"[CR]
"OFF" ----------------------- Fan control is OFF
"ON1" ----------------------- Fan control is ON1
%a
"ON2" ----------------------- Fan control is ON2
"ON3" ----------------------- Fan control is ON3
"Error code"[CR]
"000_%1"[CR]
%1 "00000"~"99999" ------------------- 0 hour to 99999 hours
"Error Code"[CR]
"000_%1"[CR]
69/74
or ON-2 on Menu, and PJ PIN CODE is not
entered so that projector is actually locked.
status is ON-1 or ON-2 on Menu but PJ PIN
CODE is entered correctly so that PJ Lock is
released.