Setting Command; Cf_Inputsearch Command; Cf_Lang Command; Cf_P-Manetime Command - Sanyo PDG-DWL100 - WXGA DLP Projector Command Manual

PDG-DWL100 Expand Serial Command Functional Specifications
8.10

Setting Command

8.10.1 CF_INPUTSEARCH Command

Command "CF_INPUTSEARCH_%1" [CR]
"ON" --------------------------- Set Input search to ON
%1
"OFF" ------------------------- Set Input search to OFF
On/Off Input search. (Valid only when in the normal Power ON status.)
The status set by this command is stored in EEPROM and the setting
Details
remains effective after the power is turned to ALL OFF status.
No display is shown when projector received command..
Acceptable
Correspondence
Unacceptable

8.10.2 CF_LANG Command

Command "CF_LANG_%1" [CR]
"ENG" -------------------------- Select ENGLISH
"DEU" -------------------------- Select German
"FRA" --------------------------- Select French
"ITA" ---------------------------- Select Italian
"ESP" --------------------------- Select Spanish
"SVE" --------------------------- Select Swedish
"JPN" --------------------------- Select Japanese
"CHI" --------------------------- Select Chinese
%1 "POL" --------------------------- Select Pohland
"TUR" --------------------------- Select Turkish
"GRE" --------------------------- Select Greece
"NOR" --------------------------- Select Norway
"CZE" --------------------------- Select Czech
"KOR" --------------------------- Select Korea
"RUS" --------------------------- Select Russia
"POR" --------------------------- Select Portuguese
"HUN" --------------------------- Select Hungarian
Select language for OSD. (Valid only when in the normal Power ON status.)
The language set by this command is stored in EEPROM and the setting
Details
remains effective after the power is turned to ALL OFF status.
No display is shown when projector received command..
Acceptable
Correspondence
Unacceptable

8.10.3 CF_P-MANETIME Command

Command "CF_P-MANETIME_%1" [CR]
"000~180" -------------------- Power managementÿ step = 10ÿ
%1
"UP" --------------------------- Increase the timer for Power management
"DN" --------------------------- Decrease the timer for Power management
Set/Cancel Power Management. (Valid only when in the normal Power ON
status.) The status set by this command is stored in EEPROM and the
Details
setting remains effective after the power is turned to ALL OFF status.
No display is shown when projector received command..
Acceptable
Correspondence
Unacceptable
"000" [CR]
"Error Code" [CR]
"000" [CR]
"Error Code" [CR]
"000" [CR]
"Error Code" [CR]
25 / 47