Cf_Input7 Command; Cf_Input8 Command - Sanyo PDG-DWL100 - WXGA DLP Projector Command Manual

PDG-DWL100 Expand Serial Command Functional Specifications
8.6.9

CF_INPUT7 Command

Command "CF_INPUT7_%1" [CR]
%1 "VIDEO" ---------------------------- Select Video
Select Video (Valid only when it is in the normal Power ON status.)
Details
The projector shows Image OSD at receiving the command.
Acceptable
Correspondence
Unacceptable

8.6.10 CF_INPUT8 Command

Command "CF_INPUT8_%1" [CR]
%1 "S-VIDEO" ---------------------------- Select S-video
Select S-video (Valid only when it is in the normal Power ON status.)
Details
The projector shows Image OSD at receiving the command.
Acceptable
Correspondence
Unacceptable
"000" [CR]
"Error Code" [CR]
"000" [CR]
"Error Code" [CR]
21 / 47