PDG-DWL100 Expand Serial Command Functional Specifications
8.4
Image Command
8.4.1
CF_ BRIGHT Command
Command
"CF_BRIGHT_%1" [CR]
"-50~050" --------------- Directly specify setting value of Brightness
%1
"UP" ---------------------- Increment setting value of Brightness by 1
"DN" ---------------------- Decrement setting value of Brightness by 1
Set user controlled value of Brightness.
Details
(Available only in the normal Power ON status)
No display is shown when projector received command.
Acceptable
Correspondence
Unacceptable
8.4.2
CF_CONT Command
Command
"CF_CONT_%1" [CR]
"-50~050"--------------- Directly specify setting value of Contrast
%1
"UP"--------------------- Increment setting value of Contrast by 1
"DN"--------------------- Decrement setting value of Contrast by 1
Set user controlled value of Contrast.
Details
(Available only in the normal Power ON status)
No display is shown when projector received command.
Acceptable
Correspondence
Unacceptable
8.4.3
CF_COLOR Command
Command
"CF_COLOR_%1" [CR]
"-16~016"--------------- Directly specify setting value of Color
%1
"UP"--------------------- Increment setting value of Color by 1
"DN"--------------------- Decrement setting value of Color by 1
Set user controlled value of Color.
Details
(Available only in the normal Power ON status)
No display is shown when projector received command.
Acceptable
Correspondence
Unacceptable
8.4.4
CF_SHARP Command
Command
"CF_SHARP_%1" [CR]
"000~031" -------------- Directly specify setting value of Sharpness.
%1
"UP"--------------------- Increment setting value of Sharpness by 1
"DN"--------------------- Decrement setting value of Sharpness by 1
Set user controlled value of Sharpness.
Details
(Available only in the normal Power ON status)
No display is shown when projector received command.
Acceptable
Correspondence
Unacceptable
"000" [CR]
"Error Code" [CR]
"000" [CR]
"Error Code" [CR]
"000" [CR]
"Error Code" [CR]
"000" [CR]
"Error Code" [CR]
15 / 47