PDG-DWL100 Expand Serial Command Functional Specifications
8.6 Input Control Command
8.6.1
CF_INPUT Command
Command
"CF_INPUT_%1" [CR]
"HDMI" ---------------------------- Select HDMI
"COMPUTER1" ----------------- Select Computer 1
"YPBPR1" ------------------------ Select YPbPr 1
"COMPUTER2" ----------------- Select Computer 2
%1
"YPBPR2" ------------------------ Select YPbPr 2
"SCART" -------------------------- Select Scart
"VIDEO" --------------------------- Select Video
"S-VIDEO" ------------------------ Select S-video
Select Input
(Valid only when it is in the normal Power ON status.)
Details
This command works the same way as "SOURCE" button of the projector
and remote control.
The projector shows Image OSD at receiving the command.
Acceptable
Correspondence
Unacceptable
8.6.2
CF_SYSTEM Command
Command
"CF_SYSTEM_%1" [CR]
Input is
Video
%1
Input is
S-Video
Select system of the currently selected Input.
(Valid only when in the normal Power ON status.)
Details
When selected Input does not meet the requirement for the specified %1,
return "101" [CR] and the command is not executed.
No display is shown when projector received command..
Acceptable
Correspondence
Unacceptable
8.6.3
CF_INPUT1 Command
Command
"CF_INPUT1_%1" [CR]
%1
"HDMI" ---------------------------- Select HDMI
Select HDMI
Details
(Valid only when it is in the normal Power ON status.)
The projector shows Image OSD at receiving the command.
Acceptable
Correspondence
Unacceptable
"000" [CR]
"Error Code" [CR]
"AUTO" --------------------------- Select MODE 1
"NTSC" --------------------------- Select MODE 2
"PAL" --------------------------- Select MODE 3
"SECAM" --------------------------- Select MODE 4
"AUTO" --------------------------- Select MODE 1
"NTSC" --------------------------- Select MODE 2
"PAL" --------------------------- Select MODE 3
"SECAM" --------------------------- Select MODE 4
"000" [CR]
"Error Code" [CR]
"000" [CR]
"Error Code" [CR]
19 / 47