Connecting The Phone - Cisco 7960 Administrator's Manual

Installing the Cisco SIP IP Phone
Step 7 When done, press the Save soft key. The phone programs the new information into
Flash memory and resets.
When you have completed your changes, ensure that you lock the
Caution
phone as described in the "Locking Configuration Mode" section on
page 3-2.

Connecting the Phone

You must connect the phone to the network and to a power source before using it.
Before You Begin
Cisco SIP IP Phone 7960 Administrator Guide
2-16
• Domain Name—Name of the DNS domain in which the phone resides.
DNS Servers 1 through 5—IP address of the DNS server used by the phone
•
to result names to IP addresses. The phone will attempt to use DNS Servers
2 through 5 if DNS Server 1 is unavailable.
Refer to Figure 2-1 for a graphical overview of the procedures in this section.
•
Chapter 2 Getting Started with Your Cisco SIP IP Phone
78-10497-02