Cisco 7960 Administrator's Manual page 85

Chapter 3 Managing Cisco SIP IP Phones
Procedure
Using an ASCII editor, open the SIPDefault.cnf file and define or modify values
Step 1
for the following SNTP-specific SIP parameters as necessary:
•
•
•
Step 2 To configure common DST settings, specify values for the following parameters:
•
•
•
•
78-10497-02
sntp_mode—(Required) Mode in which the phone will listen for the SNTP
server. Valid values are unicast, multicast, anycast, or directedbroadcast.
See Table 3-2 and Table 3-3 for an explanation on how these values work
depending on the sntp_server parameter value.
sntp_server—(Required) IP address of the SNTP server from which the
phone will obtain time data.
See Table 3-2 and Table 3-3 for an explanation on how these values work
depending on the sntp_server parameter value.
time_zone—(Required) Time zone in which the phone is located. Valid
values are hour/minute, -hour/minute, +hour/minute, hour, -hour, +hour, PST,
MST, CST, or EST.
dst_offset—Offset from the phone's time when DST is in effect. When DST
is over, the specified offset is no longer applied to the phone's time. Valid
values are the same as for the time_zone parameter.
dst_auto_adjust—Whether or not DST is automatically adjusted on the
phones. Valid values are 0 (disable automatic DST adjustment) or 1 (enable
automatic DST adjustment). The default is 1.
dst_start_month—Month in which DST starts. Valid values are January,
February, March, April, May, June, July, August, September, October,
November, and December or 1 through 12 with January being 1 and
December being 12. When specifying the name of a month, the value is
case-sensitive and should be typed as cited in this description.
dst_stop_month—Month in which DST ends. Valid values are January,
February, March, April, May, June, July, August, September, October,
November, and December or 1 through 12 with January being 1 and
December being 12. When specifying the name of a month, the value is
case-sensitive and should be typed as cited in this description.
Setting the Date, Time, and Daylight Savings Time
Cisco SIP IP Phone 7960 Administrator Guide
3-25