Erasing The Locally-Defined Settings; Erasing The Locally-Defined Network Settings - Cisco 7960 Administrator's Manual

Erasing the Locally-Defined Settings

The following is an example of the configuration for a relative DST configuration:
; sip default configuration file
(additional configuration text omitted)
time_zone : PST
dst_offset : 01/00
dst_start_month : April
dst_start_day : 0
dst_start_day_of_week : Sunday
dst_start_week_of_month : 1
dst_start_time : 02/00
dst_stop_month : October
dst_stop_day : 0
dst_stop_day_of_week : Sunday
dst_stop_week_of_month : 8
dst_stop_time : 02/00
dst_stop_autoadjust : 1
(additional configuration text omitted)
Erasing the Locally-Defined Settings
You can erase the locally-defined network settings and the SIP settings that have
been configured in the phone.

Erasing the Locally-Defined Network Settings

When you erase the locally-defined settings, the values are reset to the defaults.
Before You Begin
Cisco SIP IP Phone 7960 Administrator Guide
3-28
• Unlock configuration mode as described in the "Unlocking Configuration
Mode" section on page 3-2.
• If DHCP has been disabled on a phone, clearing the phone's settings will
reenable it.
• Select the Erase Config parameter by pressing the down arrow to scroll to and
highlight the parameter or by pressing the number that represents the
parameter (located to the left of the parameter name on the LCD).
Chapter 3 Managing Cisco SIP IP Phones
78-10497-02