Cisco 7960 Administrator's Manual page 79

Chapter 3 Managing Cisco SIP IP Phones
•
•
Procedure
Press the settings key. The Settings menu is displayed.
Step 1
Step 2 Highlight SIP Configuration. The SIP Configuration menu is displayed.
Highlight Line 1 Settings.
Step 3
Step 4 Press the Select soft key. The Line 1 Configuration menu is displayed.
Highlight and press the Select soft key to configure the following parameters as
Step 5
necessary:
•
•
•
•
78-10497-02
When configuring the Preferred Codec and Out of Band DTMF parameters,
press the Change soft key until the option you desire is displayed and then
press the Save soft key.
After making your changes, relock configuration mode as described in the
"Locking Configuration Mode" section on page 3-2.
Name—(Required) Number or e-mail address used when registering. When
entering a number, enter the number without any dashes. For example, enter
555-1212 as 5551212. When entering an e-mail address, enter the e-mail ID
without the host name.
Short Name—(Optional) Name or number associated with the linex_name as
you want it to display on the phone's LCD if the linex_name value exceeds
the display area. For example, if the linex_name value is the phone number
111-222-333-4444, you can specify 34444 for this parameter to have 3444
display on the LCD instead. Alternately, if the value for the linex_name
parameter is the email address "username@company.com", you can specify
the "username" to have just the user name appear on the LCD instead. This
parameter is used for display-only purposes.
If a value is not specified for this parameter, the value in the Name variable
is displayed.
Authentication Name—(Required when registration is enabled) Name used
by the phone for authentication if a registration is challenged by the proxy
server during initialization.
Authentication Password—(Required when registration is enabled) Password
used by the phone for authentication if a registration is challenged by the
proxy server during initialization. If a value is not configured for the
Modifying the Phone's SIP Settings
Cisco SIP IP Phone 7960 Administrator Guide
3-19