Cisco 7960 Administrator's Manual page 51

Chapter 2 Getting Started with Your Cisco SIP IP Phone
Figure 2-1
Power
outlet
(optional power
Procedure
Step 1 Connect a Category 3 or 5 straight-through Ethernet cable from the switch or hub
to the network port on the phone.
See "Connecting to the Network" section on page 1-13 for more information on
the network port.
Step 2 Connect the handset and headset to their respective ports.
See "Using a Headset" section on page 1-15 for more information on the headset
port.
78-10497-02
Cisco SIP IP Phone Cable Connections
Cisco IP Phone 7960 (rear view)
AC adapter
port
(DC48V)
cable)
RJ-11 port
Installing the Cisco SIP IP Phone
Network port Access port
(10/100 SW) (10/100 PC)
Cisco SIP IP Phone 7960 Administrator Guide
Headset
port
Handset
port
2-17