Konica Minolta bizhub C25 User Manual page 68

[LDAP
SET-
TING]
Configuration Menu Overview
[DISABLE/ENABLE]
[LDAP SERVER ADDR.]
[LDAP PORT NO.]
[SSL SETTING]
[SEARCH BASE]
[ATTRIBUTE]
[SEARCH METHOD]
[LDAP TIMEOUT]
[MAX.SEARCH RESULTS]
Settings [DISABLE] / [ENABLE]
Select whether or not to enable the
LDAP function.
Specify the address (up to 64 char-
acters) of the LDAP server.
The default setting is [0.0.0.0].
Settings 1-65535 (Default: [389])
Specify the port number of the
LDAP server.
d
The default setting is [636]
when [SSL SETTING] is set
to [ENABLE].
Settings [DISABLE] / [ENABLE]
Select whether or not to enable
SSL.
Specify the search starting point
(up to 64 characters) in a hierarchi-
cal structure arranged on the LDAP
server.
The conditions for searches can be
specified as a name or e-mail
address (up to 32 characters).
The default setting is [cn].
Settings [BEGIN] / [CONTAIN] /
[END]
The specified characters can be
searched for at the beginning,
within or at the end.
Settings 5-300 sec (Default: [60
sec])
Specify the maximum wait time
during a search.
Settings 5-100 (Default: [100])
Specify the maximum number of
destinations displayed after a
search.
2-43