This message...
SERVER MEMORY FULL
SMTP Server
THE PARTY IS FULL
TONER EMPTY
CHANGE x TONER
Toner Low x
Trans. Belt Life
Trans. Roll. Life
TRAYx OPEN
CLOSE TRAYx
USB Dev. Not support
Status, Error, and Service Messages
means...
The memory of the
SMTP server has
become full.
The maximum num-
ber of 236 destina-
tions for the scan
data has been
reached.
The indicated toner
cartridge has
become empty.
(This message
appears if [TONER
EMPTY] on the
[MACHINE SET-
TING] menu is set
to [STOP].)
The indicated toner
cartridge is low and
should be replaced
within 200 pages at
5% coverage of
Letter/A4 paper.
The time to replace
the transfer belt unit
has been reached.
The time to replace
the transfer roller
has been reached.
The indicated paper
tray is open.
A USB device
incompatible with
this machine is con-
nected.
Do this...
Free up some space
on the disk, for exam-
ple, by contacting your
server administrator.
Send the data, and
then try scanning
again. Otherwise,
delete unnecessary
destinations before
adding the desired
ones.
Replace the indicated
toner cartridge.
Prepare the indicated
toner cartridge.
Replace the transfer
belt unit.
Replace the transfer
roller.
Close the indicated
paper tray.
Disconnect the USB
device from this
machine.
10-45