Konica Minolta bizhub C25 User Manual page 108

[GRAY-
SCALE
PAGE]
[STAR-
TUP
OPTIONS]
[HOLD
JOB TIME
OUT]
PS/PCL PRINT Menu
[CUS-
TOM
SIZE]
[PAPER
TYPE]
Settings [AUTO] / [GRAYSCALE PRINT] / [COLOR PRINT]
Specify the operation to be performed for black-and-white
pages in a job specified for color printing.
If [AUTO] is selected, printing is automatically performed
according to the first page of the job.
If [GRAYSCALE PRINT] is selected, black-and-white printing is
automatically performed depending on each page.
If [COLOR PRINT] is selected, color printing is performed, even
for a black-and-white page.
[DO Settings
START-
Select whether or not a startup page is printed when
UP PAGE]
the machine is turned on.
Settings [DISABLE] / [1 hour] / [4 hours] / [1 day] /
[1 week]
Specify the length of time until print jobs saved on the hard disk
are deleted. If [DISABLE] is selected, print jobs are not deleted at
a specific time.
Specify the media size when [PAPER
SIZE] is set to [CUSTOM]. The Setting
range for [WIDTH] is 3.63 to 8.50 inches
(92 to 216 mm).
The default setting is [8.26] inches ([210]
mm) for 220 V models, and [8.50] inches
([216] mm) for other models.
The Setting range for [LENGTH] is 5.83 to
14.00 inches (148 to 356 mm).
The default setting is [11.69] inches
([297] mm) for 220 V models, and [11.00]
inches ([279] mm) for other models.
Settings [PLAIN PAPER] / [RECY-
CLED] / [THICK 1] / [THICK 2]
/ [LABEL] / [ENVELOPE] /
[POSTCARD] / [LETTER-
HEAD] / [GLOSSY 1] /
[GLOSSY 2] / [SINGLE SIDE
ONLY] / [SPECIAL PAPER]
Select the type of media that is normally
used.
[ON] / [OFF]
2-83