Konica Minolta bizhub C25 User Manual page 287

Symptom
Printing from
a USB mem-
ory device is
not possible.
Printing
takes too
much time.
Blank pages
are printed.
10-28
Cause
The file format (file
extension) is not one
that can be printed.
[MEMORY DIRECT]
for the machine is set
to [DISABLE].
A public user is not
specified for user
authentication.
The machine is set to
a slow printing mode
(for example, thick
stock).
The machine is set to
power saving mode.
The job is very com-
plex.
There is not enough
machine memory.
A toner cartridge for
a different region or
an unapproved toner
cartridge is installed
([Wrong Toner X] is
displayed in the mes-
sage window).
If an error has been
detected during
printing job transmis-
sion in the Copy
mode, it takes a while
to process the error
and resume the print-
ing operation.
One or more of the
toner cartridges are
defective or empty.
The wrong media is
being used.
Solution
Only files with the format (extension)
for JPEG, TIFF, XPS or PDF can be
printed.
Change the setting for the [UTILITY]
menu/[ADMIN. MANAGEMENT]/
[MEMORY DIRECT] to [ENABLE].
Contact the administrator of this unit.
It takes more time to print with special
media. When using regular paper,
make sure that the media type is set
properly in the driver.
It takes time for printing to start in
power saving mode.
Wait. No action needed.
Install the optional memory to increase
the machine's memory capacity.
Install a correct KONICA MINOLTA
toner cartridge approved for your spe-
cific machine.
Wait. No action needed.
Check the toner cartridges. The image
will not print correctly or not at all, if
the cartridges are empty.
Check that the media type.
Solving Other Problems