Setting A Copy Function - Konica Minolta bizhub C25 User Manual

3
Position the first page of the document on the original glass.
d
For details on positioning the document on the original glass, refer
to "Placing a document on the original glass" on page 3-33.
4
To print color copies, press the Start (Color) key. To print monochrome
copies, press the Start (B&W) key.
Scanning of the document begins.
d
In order to perform duplex (double-sided) copying or collated
(Sort) copying with 2in1/4in1 copying, specify the necessary set-
tings before performing step 4. For details, refer to "Setting
Duplex (Double-Sided) Copying" on page 6-11 and "Setting Col-
lated (Sort) Copying" on page 6-14.
5
When [NEXT PAGE?] appears in the message window, place the second
document page on the original glass, and then press the Select key.
6
Repeat step 5 until all document pages have been scanned.
If [2in1] is set, printing automatically begins after two document pages
(four document pages if duplex (double-sided) copying was set) have
been scanned. If [4in1] is set, printing automatically begins after four
document pages (eight document pages if duplex (double-sided) copy-
ing was set) have been scanned.
7
After all document pages have been scanned, press the Start (Color)
key or the Start (B&W) key to begin printing the remaining pages.

Setting a Copy Function

ID card copying, repeat copying and poster copying can be set.
d
The zoom ratio is automatically set (and cannot be changed).
d
ID card copying, repeat copying and poster copying can only be per-
formed with the original glass. Position the document pages to be
scanned so that they are aligned in the upper-left corner of the origi-
nal glass. Since the image is printed 4 mm from the top and left side,
adjust the position of the document as necessary. For details on posi-
tioning the document on the original glass, refer to "Placing a docu-
ment on the original glass" on page 3-33.
Making Advanced Copies 6-7