Registering/Editing Addresses; Registering In The Favorite List - Konica Minolta bizhub C25 User Manual

Registering/Editing Addresses

Addresses can be registered/edited in the favorite list, as speed dial destina-
tions or as group dial destinations.
d
Addresses can also be registered/edited with PageScope Web Con-
nection or with LSU (Local Setup Utility) on the enclosed Applications
CD/DVD. For details, refer to the [Reference Guide] on the Documen-
tation CD/DVD.
d
The same settings menu used to register/edit fax numbers is used to
register/edit addresses. For details on registering/editing fax num-
bers, refer to the [Facsimile User's Guide] on the Documentation CD/
DVD.

Registering in the Favorite List

From the speed dial destinations and group dial destinations registered on
this machine, register a maximum of 20 destinations in the favorite list for
convenient access to frequently specified destinations. Follow the procedure
described below to register an address (e-mail address, FTP address or
SMB address) on the favorite list.
1
In the main screen (Scan mode), press the + or , key to select [UTILITY],
and then press the Select key.
2
Press the + or , key to select [DIAL REGISTER], and then press the
Select key.
3
Press the + or , key to select [FAVORITE], and then press the Select
key.
d
4
Press the Addressbook key to switch between [SPEED DIAL] and
[GROUP DIAL].
5
Use the keypad to type in the number (between 1 and 250) for the speed
dial destination or the number (between 1 and 20) for the group dial des-
tination to be registered on the favorite list, and then press the Select
key.
The information registered for the selected speed dial destination or
group dial destination appears.
6
Press the Select key again.
7
To register another address, press the + or , key to select [ADD], press
the Select key, and then repeat the procedure from step 4.
8
To finish registering addresses, press the + or , key to select [FINISH],
and then press the Select key.
7-20
If data is already registered on the favorite list, continue with step
7 after completing step 3.
Scanning With the Machine