Konica Minolta bizhub C25 User Manual page 295

Symptom
There is
insufficient
fusing or the
image
comes off
when
rubbed.
There are
toner
smudges or
residual
images.
10-36
Cause
One or more of the
imaging units is
defective.
The media is moist
from humidity.
Unsupported media
(wrong size, thick-
ness, type, etc.) is
being used.
Media type is set
incorrectly.
One or more of the
toner cartridges are
defective or installed
incorrectly.
Solving Problems with Printing Quality
Solution
Remove the imaging units and check
for damage. If it is damaged, replace
it.
Remove the moist media and replace
it with new, dry media.
Use KONICA MINOLTA-approved
media. See "Specifications" on
page 3-2.
Also, refer to
http://konicaminolta.com
for a complete list of currently
approved media.
When printing envelopes, labels, letter
head, postcards, thick stock, single
side only paper or special paper, spec-
ify the appropriate media type in the
printer driver.
Remove the toner cartridges and
check for damage. If it is damaged,
replace it.