Nsm Documentation And Release Notes; Documentation Feedback - Juniper NETWORK AND SECURITY MANAGER - RELEASE NOTES REV 3 Release Note

Network and Security Manager 2010.3 Release Notes
Total Configuration Size
More than 50 MB
Number of Devices
Less than 200
More than 200
Number of Devices
1 through 3
4 through 8
9 through 30

NSM Documentation and Release Notes

Documentation Feedback

36
In "Table 27: Device Server RAM Requirements for Firewall/VPN or Junos Devices".
The updated information is as follows:
In "Table 28: Device Server RAM Requirements for IDP, Secure Access, or Infranet
Controller Devices". The updated information is as follows:
For a list of related NSM documentation, see
http://www.juniper.net/techpubs/software/management/security-manager/
If the information in the latest release notes differs from the information in the
documentation, follow the NSM Release Notes.
To obtain the most current version of all Juniper Networks
see the product documentation page on the Juniper Networks website at
http://www.juniper.net/techpubs/
We encourage you to provide feedback, comments, and suggestions so that we can
improve the documentation. You can send your comments to
techpubs-comments@juniper.net
https://www.juniper.net/cgi-bin/docbugreport/
the following information with your comments:
Document name
Document part number
GUI Server RAM Required
8 GB
Device Server RAM Required
4 GB
6 GB
Device Server RAM Required
4 GB
6 GB
8 GB
®
.
, or fill out the documentation feedback form at
. If you are using e-mail, be sure to include
Copyright © 2010, Juniper Networks, Inc.
.
technical documentation,