Juniper NETWORK AND SECURITY MANAGER - RELEASE NOTES REV 3 Release Note page 5

Copyright © 2010, Juniper Networks, Inc.
Due to hardware limitations on NSMXpress, the recommended limit is two devices per
job for SA/ICs running configurations more than 5 MB.
The following files on the NSM software server must be edited as described below (no
changes are needed for NSMXpress):
In /usr/netscreen/GuiSvr/bin/.guiSvrDirectiveHandler
to Xmx2048000000:
$LIB_DIR/jre/bin/java -DNSROOT=$NSROOT
-DgproGDM=$DEST_DIR -DNSDIR=$DEST_DIR/var/be
-DSTART_PATH=$DEST_DIR -DBE_CFG=${CFG_FILE}
-DLOG4J_CFG=${LOG4J_CFG_FILE} -XX:PermSize=64M
-XX:MaxPermSize=64M -Xms128000000 - Xmx2048000000
com.netscreen.devicecomm.GUIDirectiveManager -version -repo ${REPO_DEST_DIR}
-conf ${SVC_CFG_FILE}
In /usr/netscreen/GuiSvr/var/xdb/data/DB_CONFIG
parameter from
0 256000000 1
Set the shared memory to a minimum of 1 GB (kernel.shmmax = 1073741824):
In /etc/sysctl.conf, for Linux systems
In for Solarix systems
/etc/system,
In /usr/netscreen/GuiSvr/var/xdb/specs/jax.spec
:jvm-options (
: ("-DEMBEDDED_JVM=true")
: ("-Xms128m")
: ("-Xmx1024m")
In
/usr/netscreen/DevSvr/bin/.devSvrDirectiveHandler
to Xmx2048000000:
$LIB_DIR/jre/bin/java -DNSROOT=$NSROOT -DgproDDM=$DEST_DIR
-DNSDIR=$DEST_DIR/var/be -DSTART_PATH=$DEST_DIR
-DBE_CFG=${CFG_FILE} -DLOG4J_CFG=${LOG4J_CFG_FILE}
-XX:PermSize=64M -XX:MaxPermSize=64M -Xms128000000 - Xmx2048000000
com.netscreen.devicecomm.DeviceDirectiveManager -version -repo ${REPO_DEST_DIR}
-conf ${SVC_CFG_FILE}
The servers must be restarted after you change these parameters.
Important SSL VPN and Infranet Controller Instructions
, change Xmx10248000000
, change the set_cachesize
to 0 1024000000 4.
, change Xmx512 to Xmx1024m:
, change Xmx1024000000
5