Table of Contents
Advertisement
Agency Approvals for VXA2000 Series Media Flow Engines
Copyright © 2010, Juniper Networks, Inc.
Keep tools away from areas where people could trip over them while walking.
Do not wear loose clothing or jewelry, such as rings, bracelets, or chains, which could
become caught in the chassis.
Wear safety glasses if you are working under any conditions that could be hazardous
to your eyes.
Do not perform any actions that create a potential hazard to people or make the
equipment unsafe.
Never attempt to lift an object that is too heavy for one person to handle.
Never install or manipulate wiring during electrical storms.
Never install electrical jacks in wet locations unless the jacks are specifically designed
for wet environments.
Operate the appliance only when it is properly grounded.
Ensure that a reliable, low-resistance ground bond exists between the chassis and the
rack, and that the rack is permanently connected to earth.
Use only copper grounding conductors.
Do not open or remove chassis covers or sheet-metal parts unless instructions are
provided in the hardware documentation for this product. Such an action could cause
severe electrical shock.
Do not push or force any objects through any opening in the chassis frame. Such an
action could result in electrical shock or fire.
Avoid spilling liquid onto the appliance chassis or onto any appliance component. Such
an action could cause electrical shock or damage the appliance.
Avoid touching uninsulated electrical wires or terminals that have not been
disconnected from their power source. Such an action could cause electrical shock.
Always ensure that all modules, power supplies, and cover panels are fully inserted
and that the installation screws are fully tightened.
VXA2000 Series Media Flow Engines comply with the following standards:
Safety
CAN/CSA-C22.2 No. 60950-1
EN 60950
IEC 60950-1
UL 60950-1
Agency Approvals for VXA2000 Series Media Flow Engines
9
Advertisement
Table of Contents
