Juniper NETWORK AND SECURITY MANAGER - RELEASE NOTES REV 3 Release Note page 19

Addressed Issues
477349—If you select the None radio button in the NSM GUI, the context is un-initialized
and data is lost. A workaround is to save your data before you click the None button
and then restore the data after you select other options.
477575—NSM does not generate encryption commands to SRX Series gateways when
AES is chosen as algorithm.
478227—After RMA, an SRX 650 device cannot be activated in the unreachable mode.
478487—If you remove a VPN created through the NSM VPN Manager, NSM fails to
remove the tunnel interface from the zone while updating the device configuration,
causing a commit failure.
480054—NSM does not allow you to set Certificate Authority revocation to None.
480114—When a user is created on the SRX Series device template, applied to the
device, and the device is updated; NSM always displays differences in the delta config
for the encrypted password configured in the template.
480558—The NSM UI client freezes when you create and save multiple rule groups.
480566—When the DHCP domain is set in a template, the CLI is not updated to an
SSG5 device running ScreenOS 6.2.
480583—NSM does not provide an option to set policy based routing on redundant
interfaces.
482295—NSM unsets DI pack on a device running ScreenOS if Base pack is selected.
484916—NSM settings for the minimum and maximum number of packet logs that
can be stored in IDP devices need to be modified.
485633—NSM does not allow custom ICMP services without code values.
485646—During the initial update after importing a new device, NSM deletes console
port configurations from the device.
485648—Device updates from NSM fail erroneously stating an application timeout.
485656—After importing a new device, NSM tries to change its priority of redundancy
group value from 1 to 0.
485773—NSM incorrectly generates validation errors when importing group
configurations from an SRX series device.
485897—NSM displays a validation error on predefined JUNOS GTP services.
488384—NSM does not delete custom zones defined in separate VSYS devices in
separate subdomains.
491156—The NSM error message for duplication of objects is not sufficiently informative.
494878—During a fresh installation of NSM 2009.1r1a, predefined service objects are
not converted to xdb.init.
Copyright © 2010, Juniper Networks, Inc. 19