Network and Security Manager 2010.3 Release Notes
14
420276—VPN monitor does not display an entry for the vsys cluster member if the
name of the member is changed.
429396—When a user performs a delta configuration after updating the device
configuration on an SRX Series device using a template, the same configuration data
that was pushed earlier to the device during the update is displayed.
431656—When a standalone IDP device is added through a unreachable workflow,
the device update operation fails.
445014—A Java exception error on the GUI occurs after modeling vsys to include a dot
as part of its name.
462408—NSM displays "Unable to acquire lock, Locked by admin, Open read-only"
when you edit a device. This issue has been observed when editing an ISG2000 cluster
member and also on a J6350 device. This issue is not always reproducible. The
workaround is to restart the GUI Server.
466608—NSM unsets the proxy ID of the VPN when it is configured in the template
at the first delta after restarting the GUI Server.
468807—The comments are not pushed to the device, during a Junos OS device update.
481318—After an upgrade to ScreenOS 6.2 devices, NSM tries to send the command
, which results in an update failure.
unset zone vlan block
483395—After running the import admin directive, NSM changes other configurations
along with admin accounts.
483452—NSM 2009.1r1 randomly fails to recognize certain IDP detector engine versions.
483469—Major screen redraw issues occur when running Microsoft Vista 32-bit and
NSM.
485458—NSM displays a missing mgt route error.
486371—The GuiServer Manager crashes as the system runs out of memory.
495027—Power failure on the active GUI server causes a 7- to 10- minute delay before
the Device Server connects to the active GUI.
497349—J Series devices cannot be validated through NSM.
498554—The HA Server does not stop during system shutdown.
498790—NSM unsets vrouter trust-vr on update if a comment is also configured.
499064—The NSM GUI Server crashes with a Mutex Lock Event.
499688—You cannot use the NSM GUI to remove an IDP platform from a custom IDP
attack signature.
499748—When a packet capture (pcap) is requested and it contains VLAN traffic,
NSM replies with a JAVA Null pointer exception.
500367—Policy update in NSM fails intermittently, displaying a Java NullPointer
Exception.
500769—NSM does not support PPP and PPP-service protocols on J Series devices
with a 10.0r1.8 image.
Copyright © 2010, Juniper Networks, Inc.
Need help?
Do you have a question about the NETWORK AND SECURITY MANAGER - RELEASE NOTES REV 3 and is the answer not in the manual?
Questions and answers