Ethernet; Forwarding; Hardware; Igmp - Juniper JUNOSE 11.0.2 - RELEASE NOTES Release Note

Ethernet

Forwarding

Hardware

IGMP

IP
LM4: reset type: panic; task: scheduler; file: vsm.cc - Vsm::addAciData [Defect
ID 90723]
LM4 reset type: panic, file: thernetHF1072.cc, line: 204, task: scheduler,
Ethernet::autoConfigVlanReceive [Defect ID 90857]
On executing the show configuration include-defaults > test.scr command
the following message is displayed on the CLI: [Defect ID 90425]
Please wait... minimum-links 1
Dynamic VLAN sub-interfaces fail to be created after shutdown and modify
VLAN bulk-config vlan-range. [Defect ID 89962]
VLAN bulk-config cannot be removed after certain CLI sequences. [Defect ID
90214]
VLAN subinterfaces fail to be created when LAG major port is down. [Defect ID
90606]
LM10A crash - SRA-2048 - file: ic1Detector.cc ,line: 1013 ,message:
Ic1Detector::requestRecovery executed forced IC crashes [Defect ID 90704]
LM10: Memory leak on "luCodeBranch code branch representations" when
classifier-group "*" references a rate-limit-profile. [Defect ID 90737]
LM10A Memory leaking after flapping DHCP/PPP subscribers along with Link
Flap. [Defect ID 90603]
WAN SPI4 drops due to missing start or end of packet is not triggering a panic.
[Defect ID 90611]
LM10 reset type: panic arg (0x7) file: aptationLayer.cc line: 797 lr:
Hw2PolicyAdaptationLayer::setStatisticsIndex [Defect ID 90468]
Deadlock igmp <-> ipHelper encountered while executing the sh ip mroute
239.113.1.1 command when multicast traffic was being sent to a number of
IGMP interfaces. [Defect ID 90547]
100% CPU utilization after issuing the show ip socket statistics det command.
[Defect ID 90751]
Release 11.0.2
Resolved Known Problems
57