Cabling The Router; Cabling Overview - Juniper E120 - RELEASE 11.1.X HARDWARE GUIDE 3-25-2010 Hardware Manual

Chapter 5

Cabling the Router

Cabling Overview

This chapter describes how to cable the router. Before you cable the router, ensure
that you have completed all installation instructions identified in previous chapters.
This chapter contains the following sections:
Cabling Overview on page 47
Required Tools, Wires, and Cables on page 48
Cabling the SRP IOA on page 49
Cabling IOAs on page 51
Cabling the Router for Power on page 52
The Next Step on page 56
Cabling the router requires the following main tasks:
Familiarize yourself with the module ports, and ensure that you have the cables
1.
and wires needed to complete each cabling procedure. (See Figure 25 on
page 48.)
Read and understand all safety warnings. (See "Installation Guidelines and
2.
Requirements" on page 97.)
(Optional) Connect timing ports.
3.
Connect the SRP IOA to the network and to a management console.
4.
Connect grounding wires to the router chassis.
5.
Connect the power cables from the power source to the power distribution unit
6.
(PDU).
Connect the IOAs to their appropriate network interface.
7.
47
Cabling Overview