Lifescan ONETOUCH PROFILE Owner's Booklet page 83

MESSAGE
battry
replace now
c l e a n
t e s t
area
PROBLEM
When this symbol appears
and stays on the screen, it
means the batteries are
getting low. This symbol
will remain on the display
while the meter is on until
the batteries are replaced.
When this symbol is flashing,
the batteries are too low.
*Neither dead batteries nor battery removal have an effect on information
stored in the memory.
1. There is dirt, blood, or
lint on the test area.
2. Your hand or an object
covered the test area while
the meter was turned on.
WHAT TO DO
You will still be able to test,
but replace the batteries as
soon as possible. If batteries
get too low, the meter will not
operate.*
Replace the batteries
immediately. The meter
will not operate.*
1. Clean the test area
and test strip holder
according to instructions.
2. Repeat the test. Keep the
meter's test area clear.
76