Lifescan ONETOUCH PROFILE Owner's Booklet page 79

MESSAGE APPEARS WHEN
insert
The meter is ready to perform a blood, check strip, or control
code 10 solution test. (In this example, code 10 refers to the test strip code;
(Example)
this should match the code number on the test strip vial.)
strip
wait
The meter is performing internal checks.
please
apply
The meter is ready to receive a blood or control solution sample. If
sample
performing a check strip test, this is your signal to remove the check
strip from the meter.
45 0
The meter is counting down from 45 seconds to 0.
. . . . . . .
106 mg/dl
A blood test has been completed. This indicates a blood glucose result
(Example)
when the meter is set for mg/dL.
8: 0 1am 7-01-00
5. 9 mmol/l
A blood test has been completed. This indicates a blood glucose result
(Example)
when the meter is set for mmol/L, the unit of measure used in Canada
8: 0 1am 7-01-00
and parts of Europe.
72