Lifescan INDUO Quick Reference Manual

Temperature too low for
testing. Repeat test when
temperature/meter is above
43˚F (6˚C).
Temperature too high for
testing. Repeat test when
temperature/meter is below
111˚F (44˚C).
Battery power too low for test-
ing. Replace battery immedi-
ately.
Problem with meter. Retest
with a new test strip.
Used test strip inserted, or
meter problem. Retest with a
new test strip.
Blood or control solution
R
applied before appeared on
display. Retest with a new test
strip.
Three possible reasons:
1) Possible high glucose in a
test environment near low end
of operating temperature range
(43–111˚F/6–44˚C). Retest in
a warmer environment.
Or, 2) Test strip damaged,
moved during testing. Repeat
test with new test strip.
Or, 3) Sample improperly
applied. Review blood applica-
tion and repeat test with new
test strip.
Covered by one or more of the following U.S. patents:
5,708,247, 6,241,862, and 6,284,125.
Test strip damaged or confirma- Important phone numbers
tion window not full. Retest with
LifeScan Customer Services
a new test strip.
(24 hours a day, 7 days a week):
If problem persists, call LifeScan
English 1 800 227-8862
Customer Services:
Español 1 800 381-7226
English (1 800 227-8862),
Español (1 800 381-7226).
Healthcare Professional
Pharmacist
Diabetes Educator
Other
© LifeScan, Inc. 2000
Milpitas, CA 95035
Rev 04/02
AW*06149801A*
Blood Glucose Meter System
QUICK REFERENCE GUIDE
IMPORTANT NEW INFORMATION ABOUT YOUR O T ® ULTRA
NE OUCH
BLOOD GLUCOSE METER OR INDUO™ SYSTEM
This new Quick Reference Guide describes two additional conditions
that may affect the operation of your meter. We recommend that you
keep this Quick Reference Guide with your meter for easy reference.
IMPORTANT: Before testing, read detailed instructions in your
OneTouch ® Ultra or InDuo™ Owner's Booklet. See inside for a quick
review of instructions on coding the meter and the test procedure.
In partnership with
Manufactured by
2880 Bagsvaerd, Denmark