Lifescan ONETOUCH PROFILE Owner's Booklet page 94
Hide thumbs
Also See for ONETOUCH PROFILE:
- Owner's booklet (132 pages) ,
- Owner's booklet (82 pages) ,
- Owner's booklet (98 pages)
Table of Contents
Advertisement
Step 4: Replace the Test Strip
Holder.
Hook the bottom of the test strip hold-
er onto the square notch on the meter.
Press down on the raised dots of the
test strip holder until it snaps firmly
into place. Press forward on the base
of the test strip holder to be sure it is
properly in place. You are now ready
to do a check strip test. If the check
strip will not slide into the test strip
holder, repeat this step.
87
Advertisement
Table of Contents
