Lifescan ONETOUCH PROFILE Owner's Booklet page 93

Check the clear, protective coating
over the test area to make sure it is
not scratched or damaged.
Rub the test area with a cotton swab
or soft cloth dampened with water to
remove all blood, dirt, or lint from the
test area. If necessary, a mild liquid
dishwashing detergent mixed with
water may also be used. Do not apply
full-strength detergent to the test area.
Be careful not to scratch the test area.
Dry the test area with a soft, dry tis-
sue or cloth. Remove any lint.
86