Decimal Separator; Exiting The Set-Up Mode - Lifescan ONETOUCH PROFILE Owner's Booklet

To change the unit of measure, enter
the set-up mode (see page 27). Use the
M button to choose the Unit of Measure
option. Press the C button to change the
unit of measure. You may now turn the
meter off to exit the set-up mode or press
the M button to move to the next option.

Decimal Separator

The meter is set to display millimoles
per liter (mmol/L) and bolus insulin
units using a decimal point. This option
allows you to select a comma instead of
a decimal point as a decimal separator.
To change the decimal separator, enter
the set-up mode (see page 27). Use the
M button to choose the Decimal
Separator option. Make your selection
using the C button. You may now turn
the meter off to exit the set-up mode
or press the M button to move back to
the Beep option.

Exiting the Set-Up Mode

All options are automatically saved
as they are made. After you have
completed viewing or changing your
option settings, simply turn the meter
off. The meter will automatically turn
itself off after two minutes of inactivity.
37