Lifescan ONETOUCH PROFILE Owner's Booklet page 92

Step 2: Clean the Test Strip Holder.
Wash only the test strip holder with
soap and water.
Clean the underside of the test strip
holder. Using a damp cotton swab,
clean the small hole from both sides
to remove any dirt, blood, or lint.
Rinse well. Dry completely with a
soft cloth or tissue.
Step 3: Clean the Test Area.
CAUTION: Do not get water
inside the meter. Do not immerse
the meter in water.
The following cleaning agents will
damage the meter.
DO NOT USE:
Alcohol
■
Cleansers with ammonia or phenol
■
Windex or other glass cleaners
®
■
Abrasive cleansers
■
Windex is a registered trademark of The Drackett Products
Company.
85