Lifescan ONETOUCH PROFILE Owner's Booklet page 86

MESSAGE
not
enough
b l o o d
retest
not ok
PROBLEM
1. The blood or control
solution sample was too
small or smeared.
2. The test strip was not
inserted far enough into
the test strip holder.
3. Your hand or an object
covered the test area while
the meter was turned on.
1. If appearing when you
turn your meter on, your
meter may have an elec-
tronic problem.
2. If appearing at the end of a
test, your meter may have
been moved while applying
blood or during the test
process.
WHAT TO DO
1. Repeat the test with a
new test strip and a large,
shiny drop of blood or
control solution.
2. Repeat the test with a new
test strip, pushing the test
strip all the way into the
test strip holder.
3. Repeat the test. Keep the
meter test area clear.
1. Call LifeScan
Customer Services at
1 800 227-8862.
2. Repeat the test with a new
test strip; try not to move
the meter.
79