Wireless Setup - D-Link DHP-W306AV User Manual

Section 3 - Configuration
Enable
Check this box to enable the wireless function. If you
Wireless:
would prefer not to use wireless, uncheck the box to
disable all the wireless functions. You may also set up a
specific time range (schedule). Select a schedule from
the drop-down menu or click Add New Schedule to
create a new schedule.
Wireless
When you are browsing for available wireless
Network
networks, this is the name that will appear in the list
Name:
(unless Visibility Status is set to Invisible, see below).
This name is also referred to as the SSID. For security
purposes, changing the default network name is
highly recommended.
Enable Auto
The Auto Channel Scan setting can be selected to allow
Channel
the DHP-W306AV to select the channel with the least
Scan :
amount of interference (during boot-up). Indicates the
channel setting for the DHP-W306AV.
Wireless
The channel can be changed to fit the channel setting
Channel:
for an existing wireless network or to customize the
wireless network. If you enable Auto Channel Scan,
this option will be grayed out.
Wireless
Select one of the following:
Mode:
802.11n Only - Select if you are only using 802.11n
wireless clients.
Mixed 802.11n, 802.11g and 802.11b - Select if you are
using a mix of 802.11n, 11g, and 11b wireless clients.
Mixed 802.11n, 802.11g - Select if you are only using
802.11n, 11g wireless clients.
D-Link DHP-W306AV User Manual

Wireless Setup

21