Firmware - D-Link DHP-W306AV User Manual

Section 3 - Configuration
You can upgrade the firmware of the access point from this page. Make sure the firmware you would like to use is on the local hard drive of your
computer. Click Browse... to locate the firmware file to be used for the update. Please check the D-Link support site for firmware updates at
http://support.dlink.com. You can download firmware upgrades to your hard drive from the D-Link support site.

Firmware

Click on the Check Now button to find out if
Information: there is an updated firmware or language pack
version. If a new version exists, download the
new firmware to your hard drive.
Firmware Upgrade: After you have downloaded the new firmware,
click Browse to locate the firmware update on
your hard drive. Click Upload to complete the
firmware upgrade.
Language Pack To upgrade the language pack, follow these
Upgrade: steps:
1. Click the Browse button to locate the D-Link
language pack upgrade file on your computer.
Note: Language pack file extension will be
*.LNG
2. Once you have found the file, click the
Upload button to begin the language pack
upgrade process. This can take a minute or
more.
3. Wait for the device to reboot. This process
can take about 75 seconds.
D-Link DHP-W306AV User Manual
Firmware
36