D-Link DHP-W306AV User Manual page 49

Section 3 - Configuration
It is recommended to enable encryption on your wireless access point before your wireless network adapters. Please establish wireless connectivity
before enabling encryption. Your wireless signal may degrade when enabling encryption due to the added overhead.
1. Log into the web-based configuration by opening a web browser and entering the IP address of the access point (192.168.0.50). Click on Setup
and then click Wireless Settings on the left side.
2. For Security Mode, select WPA-Enterprise.
3. For WPA Mode, you can select Auto (WPA or WPA2), WPA2 only or
WPA Only.
4. For Cipher Type, select TKIP or AES.
5. Next to RADIUS Server, enter the IP Address of your RADIUS server.
6. For Port, enter the port you are using with your RADIUS server. 1812
is the default port.
7. Next to Shared Secret, enter the security key.
8. Click Save Settings to save your settings.
D-Link DHP-W306AV User Manual 49