Lan Setup - Dhcp - D-Link DHP-W306AV User Manual

Section 3 - Configuration
This section will allow you to change the local network settings of the access point and to configure the DHCP settings.
LAN Connection
Use the drop-down menu to select Dynamic IP
Type:
(DHCP) to automatically obtain an IP address
on the LAN/private network.
Device Name:
Enter the Device Name of the AP. Changing the
Device Name is recommended if there is more
than one D-Link device within the subnet.
Save Settings:
Click Save Settings to save and activate the
new changes.
D-Link DHP-W306AV User Manual

LAN Setup - DHCP

23