Section 1 - Product Overview
1
2
WPS/Eny LED
3
4
Encryption Button
D-Link DHP-W306AV User Manual
Hardware Overview
1
Reset Button
Press and hold the button to reset to factory default.
When enabling WPS, the light will blink during broadcast. Once connected, the LED will remain lit
5 seconds and then will turn off. The LED will start blinking after the Encryption button is pushed.
The LED will turn off once the PowerLine AV is connected to a PowerLine network.
Press to start the WPS process. You will have 120 seconds to start the WPS process on another
WPS Button
wireless device.
Push this button to establish a secure powerline network with other PowerLine AV devices.
Side
3
2
4
8