Wireless - D-Link DHP-W306AV User Manual

Section 3 - Configuration

Wireless

Connect an Ethernet cable from the Ethernet port on the DHP-W306AV to a computer for configuration.
If you wish to change the default settings or optimize the performance
of the DHP-W306AV, you may use the web-based configuration utility.
To access the configuration utility, open a web browser such as Internet
Explorer and enter either http://dlinkap or http://192.168.0.50 in the
address field.
By default, Admin will be the User Name . Leave the password blank.
If you receive a "Page Cannot be Displayed" error, please refer to the
Troubleshooting section on page 60 for assistance.
If this is your first time configuring the AP, the Wizard will assist you to
configure your DHP-W306AV.
D-Link DHP-W306AV User Manual 17