Configuration; Wireless Setup Wizard - D-Link DAP-1320 User Manual

Section 3 - Configuration
Use a wireless computer or mobile device with a web browser to access the Setup Wizard. As an alternative , you can go to the
"Web-based Configuration Utility" on page 19.
1. Find an available wall outlet near your wireless router. Plug in the
DAP-1320, and wait until the power LED turns to a blinking amber.
This means the device is booting up.
2. From your wireless computer, go to the Wireless Utility to display
the available Wi-Fi Networks and select the Wi-Fi Network Name
(SSID) that is on the Wi-Fi Configuration Card (ex: dlink-a8fa). Then,
enter the Wi-Fi Password which is also located on your Wi-Fi
Configuration Card. (ex: akbdj19368).
3. Open a web browser and enter http://dlinkap.local./. Or you can
enter the IP address of the DAP-1320.*
* The default IP address is 192.168.0.50. Once the DAP-1320 connects to your router, it will get assigned a new
IP address based on your router/network's DHCP settings. You will need to log in to your router and view the
DHCP table to see what IP address was assigned to the DAP-1320. The MAC address is printed on the label on
the DAP-1320.
D-Link DAP-1320 User Manual

Configuration

Wireless Setup Wizard

DAP-1320
Wi-Fi Name(SSID) 2.4Ghz:
dlink-2c19
Wi-Fi Name(SSID) 5GHz:
dlink-2C1B-media
Password:gccnu80856
11